How to Find Suitable Cloth Roll Cutting Machine

With the current state of civilization, the textile sector is thriving. In many nations, the textile sector has enormous growth potential. When discussing the textile industry, it is necessary to bring up the subject of textile machines, which are intimately associated with the textile industry. When it comes to the textile business, the cloth cutting machine is one of the most crucial machines.

It is possible to use the SUNTECH cloth roll cutting machine ST-USCM to trim fabric selvedges or to cut fabric into stripes.

machine for cutting cloth rolls on a roll

First, let us have a look at its organizational structure.

Ultrasonic transducer with horn, mold, and generator as a combination. There will be a single set that includes an ultrasonic generator, an ultrasonic converter, an amplitude transformer, and a mold.
There are two different types of blades. Some are used for embossing, while others are used for cutting the edges. We have a procedure in which we cut the edge.
The ultrasonic cutting machine operates on a fundamentally different premise than ordinary cutting machines. It is the function of the ultrasonic cutting machine to heat and melt a portion of the material that is to be cut in order to achieve the goal of cutting the material that the machine is designed to do.
Ultrasonic cutting machines have the following advantages: they do not need sharp blades, they do not require a lot of pressure, and they do not chip or harm the material being cut.
The cutting blade is vibrating ultrasonically, and the frictional resistance is very low, making it difficult for the material to be cut to cling to the blade throughout the process. Frozen, viscous, and elastic materials all respond well to its cutting action. It is especially useful for cutting items like as food, rubber, or pressure that is unpleasant to apply.
The cutting component undergoes a fusion action at the same time that it is being cut. The cutting area has been meticulously trimmed to prevent the material being cut from becoming loose (flashing of textile materials). Moreover, the use of ultrasonic cutting machines may be extended to include tasks such as digging holes, shovel digging, scraping painted surfaces, carving, slitting, and so on.
The kind of cutting board: (We should use the cutting board type)
The cutting board type cutting machine applies ultrasonic vibration to the cutting bottom mold, which is then loaded. This bottom mold is similar to the cutting board used in everyday life, in that it causes the cutting board to create ultrasonic vibration, which may also have the impact of cutting, and the cutting tool does not need to be changed; instead, you can use conventional tools to complete the task.

underlying principle of operation

One of the basic working principles is to use high-frequency oscillation to transmit sound waves to the welding surface of the workpiece by means of the welding head, and to instantly cause the molecules of the workpiece to rub together in order to reach the melting point of the product, thereby completing the rapid dissolution of solid material and finishing the trimming.

Flower wheel molds made of special alloy steel can be used to create a variety of complex flower-shaped patterns that can be customized to meet specific customer requirements; the welding head is wear-resistant and has a long service life; the flower mold is simple to disassemble and reassemble; the eccentric adjustment is flexible, fast, and of high quality;

Precautions

Work in an atmosphere that is dusty, corrosive, hot, or humid if possible.
During operation, the three-pin plug of the power supply, phase line C, neutral line N, and ground line G must all be consistently grounded.
If the voltage fluctuation exceeds this range, the motor may be damaged or burnt out, and the speed and torque of the motor may be reduced. If the voltage varies significantly, it is recommended that a voltage stabilizer be fitted.
Check with an ultrasonic probe to see whether the pointer on the amplitude meter is less than 50. The expertise of the operator has a significant impact on the efficiency of the equipment in terms of manufacturing output. Operators with less experience should start off by adjusting the speed more slowly to guarantee their own safety.