Such skirt in a wedding dress generally has a greater length at the rear to create a tail. Like the mermaid style, the fit-and-flare design wedding dresses for plus size( ) is right at the top and looser in the lower leg, which makes it easier to walk what more adjusted models. The fit-and-flare model dresses provide an adjusted silhouette that opens from the knee.


1.Meça to yourself or the person for whom the dress will be made using measuring tape. The bust, waist and hips at the widest point is required for proper preparation, especially when the dress is adjusted. Measure the waist to the floor to determine the length. Use the steps to select the dress mold size.

2.Recorte the pieces of the mold to the right size. Make a note if the mold specify the space to be left to the seam. If you do not specify, you must include extra space around each piece to cut the fabric. Measure the piece of molding to the skirt to compare with your previous waist measurement to the ground.

3.Estique the dress fabric on a flat work surface and clean. Place the mold parts upon in accordance with instructions8th grade graduation dress( ) taking account of the tissue cutting several pieces or folded fabric piece from a mold. If necessary, leave 1.2 cm for sewing on all sides of the pieces. Also, leave extra space on the hem of her skirt to create the hem.

4.Costure the dress bodice if separated. Try several times throughout the process to ensure that serves comfortably. For best results, try it with the lingerie you want to wear under the dress on her wedding day.

5. Attach pins with the parts of the skirt on each other at the seams, the fabric with the right sides facing each other. If separate, sew the skirt on the bodice. Make a straight line temporary seaming. The points do not need to be perfect, just attach the skirt so you can adjust it to the right size.

6.Set dress. The bodice should be perfect, then at that time you will be experiencing to adjust the fit of the skirt. Stand on a chair, if necessary, and ask a helper to place pins along the tissue where the skirt needs to be adjusted at the waist, hips and outer thigh. No pin should be placed below the level of the thigh, then it is the point where the skirt starts to open.

7.Tire dress and reposition the pins so you can sew the skirt. Do this on the sides of the skirt with a sewing machine, using smooth and uniform stitches. Sew again at the beginning and end points to hold more firmly and stop sewing at the time of the lower thigh.

8.Prenda the bottom of the skirt to open it from the bar to the points of the top. Stitch the side of the top of the skirt, holding the edges of the seamless skirt fabric.

9.Experimente the dress again, now with the shoes you will use on your wedding day. Have a helper hold the bar with pins best simple wedding dress( ) at the perfect height for shoes and your height. The helper need only hold pins on the front and dress sheath side, since the back will be longer. Take the dress and fasten the back hem. If desired, pass the iron bar.

10.Costure the hem, going slowly at a regular pace with the sewing machine to avoid accidentally wrap the fabric. Press the finished hem, if desired.

You need to be a member of Fashion Industry Network to add comments!

Join Fashion Industry Network

Email me when people reply –

Forum Rules

PLEASE keep all discussions relevant to fashion, textiles, beauty products, or jewelry.

Follow the Fashion Industry Network Rules.

It is always a good time to review fabulous fashion.


Hot topics of possible interest:

  Thank you for using the Fashion Industry Network.  Have you helped another member today? Answer questions in the forum. It brings good luck.