Fashion Industry Network

The Fashion Industries Favorite Business Network ...

Now everybody knows that the best flat iron for our mane is no hair straightening iron. However, IMO the hair straightening iron is best technology since sliced bakery and one that I cannot live without (ok, just a little dramatic but most of us are aware of the PNW rain and the beautiful frizziness it brings with it).

So… what’s difference between titanium, ceramic, and tourmaline ?

Ceramic plates enable a straight distribution of heat and have lower potential to burn flowing hair. Ceramic coating on plates can chip off and cause snagging, so it’s better to use full ceramic plates rather than ceramic coated plates.

Titanium plates warm up the most effective and tranfer heat faster than ceramic. If you are using them properly, there’s less prospect of heat destruction. But, going out of the plates on your hair too long can in fact cause more destruction.

Tourmaline is a crystalline mineral that’s crushed up and used to coating the plates of a flat iron. It creates the mane shinier, straighter, and less frizzy than other flat irons.

When it comes to which dish material is better, we can look at just how many passes it requires to get your hair straight.

Titanium is known to heat up extremely fast. It is also known to have hot spots or cool spots in a few brand types. When they’re working just fine the heat from titanium dish may be too much for some people.

Ceramic, on the other hand, has even heating, meaning you don’t have to feed your hair many times to get it all evenly straightened. The less the amount of moves the less heat destruction and time is taken up to iron.

Heat Transfer
Heat transfer is enough time it requires the iron to copy heat from itself to flowing hair strands. Ceramic runs on the gentle very good infrared energy to heat flowing hair and for that reason straighten it. Some brands of ceramic hair straighteners can heat up to a maximum temperature within 30 seconds. Within this category titanium definitely, comes from top. The metallic may warm up faster than every other dish material. In addition, it transfers heat the fastest. Heat from titanium might be a little more than that of ceramic, but everything depends on nice hair type. Fine-haired women who don't need all the heat are better off with ceramic plates.

Heat Evenness
All flat irons make hair right, but perhaps you have ever noticed a spot that just didn’t get as direct as the others of flowing hair. Then you possessed to debate it again. Though at first, all irons straighten evenly with time irons plated with titanium can have wintry spots. These cool spots do not transfer all the heat as the rest of the plate thus the portion of not so upright scalp. Ceramic, on the other hand, has great heat distribution. Every section of the plate produces the same amount of energy. This implies less passes and even more evenly straightened head of hair.

In the long run the budget we've is what will determine whether we buy titanium or ceramic irons. The ceramic irons are just a bit more expensive if they're natural ceramic plates. The titanium flat irons can cost more if you’re choosing the high-end type. Look out for irons that say pure titanium or pure ceramic to avoid disappointment. The secret around a budget is to find items within your cost range and read genuine product critiques. Several sites will have a review of the good and the bad of a particular product. You are able to decide what product works best flat iron for fine hair and the extra benefits to choose.

If you hair straightening iron flowing hair often or plan on utilizing it for commercial purposes like a salon, you want a durable product. Ceramic has all the advantages of soothing energy and even heat distribution however when the offer breaker is strength it might just not slash it. A ceramic plate needs care and doesn’t take kindly to being fallen. The continuous shedding off your ceramic iron might lead to cracks in the dish which will finally snag nice hair causing breakage.

A titanium flat iron, on the other hand, doesn’t suffer from cracks. The metallic is the light but quite strong reason it is employed in the building of aircraft. When the engineers can trust it never to let a aircraft fall apart it will work equally well for your iron. Most clean titanium plates outlive the iron itself working just as well even following the body gets old.

Ease of use
A titanium flat iron will be better to handle since it is light and portable. You also don't need to stress about dropping it and breaking the plate as you'll with a ceramic flat iron. Though it takes many drops to split clean ceramic, you wouldn’t want to risk it. So if you know, you’re just a little clumsy be more mindful or opt for titanium.

Alternatively, ceramic is merely easier for many people to work with because you don’t run the chance of burning your hair off. This is especially ideal for beginners who have no idea how to go the iron around their heads.

Fine Hair
You know flowing hair better than anyone, but if heat helps it be shrivel up and pass away, you will need to go with less temperature hair straightening iron. Fine locks doesn’t mean you have hardly any from it, it just means each strand is thin. Plenty of folks have fine head of hair but lots than it which can cause its own styling problems. This mane type needs an flat iron that’s flexible and can heat up to 350 levels or less (sometimes much less). Too hot an flat iron can mean it’s time for a haircut whenever your ends appear to be you took a match to them. Plus, the smell of burnt wild hair isn’t exactly pleasant!

Another way to handle it is to get an iron with an electronic read out and that means you can tell exactly what temperature it reaches. Control is everything when you’re looking to avoid frying flowing hair. Beyond that, you will need to be sure to get a straightener that heats regularly, but also for different reasons than other locks types. For coarse mane, hot areas mean its way harder to really get your mane upright because you are only getting the right heat in really small areas. In the case of thin locks, hot spots mean you could be frying regions of your head of hair.

Coarse And Natural Hair
In case the strands of flowing hair are thick no matter how much or little you have than it, you will desire a good iron that gets hot enough to handle your mane. That doesn’t signify you will need to review and over to get the bits straight, but it can mean you will need heat one or more times to obtain a handle on those strands. Most irons will heat between 410 and 460 certifications at their best, which should be all you need for virtually any hair type. When you’re deciding on a straightener for coarse mane, you want to go with something which has a dependable material rather than something that is coated and can flake over time. In which particular case, you either want titanium because the top will be smooth or something entirely ceramic. The ceramic can be coated with tourmaline, silicon or one of the many other different materials used for plates offering constant heat.

Views: 84


You need to be a member of Fashion Industry Network to add comments!

Join Fashion Industry Network

Fashionable Suggestions

Review more fashion:



  • Add Photos
  • View All



Fashion Industry Network

Here are some fashion links of interest:

Fashion Industry

Fashion Jobs

Fashion News

Fashion Calendar


Fashion Blog

It is always a good time to learn more about clothes, shoes, style, or accessories.

We hope that you love the apparel industry as much as we do.

© 2019   Created by Apparel1.   Powered by

Badges  |  Report an Issue  |  Terms of Service

  Thank you for using the Fashion Industry Network.  Have you helped another member today? Answer questions in the forum. It brings good luck.