Spec sheet for Lingerie Design?

Replies to This Discussion

Permalink Reply by Apparel1 on July 2, 2009 at 2:15pm

There are many points of measure for bras. For example, here are some points of measure for an underwire bra.

Across Bust Seam
Bottom Back
Distance Between Back Straps
Bottom Band Extended
Bottom Band Relaxed
Back Strap
Back Tab Length
Back Strap Placement
Back Closure Height
Cup Opening
Dart Length
Distance Between Cups
Distance Between Front Straps
Front Strap
Gore Height
Gore Bottom
Gore Top
Hook Up
Neckline
Side Front
Side Seam Length
Strap Platform
Top Back
Total Front Neckline
Total Strap Length
Vertical Bust Seam
Wire Channel
Wire Play
Dart to Top of Center Gore Distance

sorry, I don't have time right now to type out the method of measuring each of these points. Hope above helps a bit. Good luck with your project.

• ▶ Reply

Permalink Reply by San Jose Fashion Week on October 11, 2009 at 3:47pm

I wouldn't mind this information if you are willing to share this.

Thanks,

Stevn

• ▶ Reply

Permalink Reply by Dinesh Perera on October 12, 2009 at 6:11am

Yes I can help , I have some of usa measurement...if you need pls contact me through my personal mail. dineshper@hotmail.com

• ▶ Reply

Permalink Reply by Mindy on April 12, 2010 at 2:04pm

Alexandra -
Please be careful about specing bras without have an experience professional look at the grading and points of measure.
If you already have this, then great! Where you can really ruin your product is in the grading of different sizes, as the garment grows or shrinks, it much do it proportionately to how the body grows in different areas. If your sample fits great it doesn't always mean the other sizes will be just as great. Good luck!
if you need more help, my company has much experience in bra development www.clothierdesignsource.com

• ▶ Reply